weatherseals

circleburner12 · Post by **circleburner12** » Sun Jul 08, 2012 5:50 pm

cant find in manuals, where the the weatherseals bonded too, the lids them self or to the panels? thxs

Post by **wesk** » Sun Jul 08, 2012 8:48 pm

Give us the Yankee English terms for lids.

circleburner12 · Post by **circleburner12** » Mon Jul 09, 2012 12:37 pm

how about hillbilly english terms,

glove box lid/door
storage bx lid/door under the pass seat. thxs

evanso1975 · Post by **evanso1975** » Mon Jul 09, 2012 1:26 pm

Can't speak for the under-seat toolbox lid, but my glove box had the remains of the seal attached to the door, not the dash panel. That's for the M38; I guess the M38A1 would be similar (if it works, don't change it

).

There's a photo of the toolbox lid near the bottom of this post (5th from the bottom):
http://www.g503.com/forums/viewtopic.ph ... w=previous

Can't say if that's original, but the remains of the seal look to be bonded to the lid. Hope this helps.......

Owen.

Post by **wesk** » Mon Jul 09, 2012 9:09 pm

Both the glove box and the tool box door/lid/cover seals/gaskets go on the flat inner surface of the doors/lids/covers. See illustration below.