Intersting finds on 12/1953 M38a1

Discussion topics on Willys Overland M series vehicles
Post Reply
User avatar
citabra
Member
Posts: 34
Joined: Fri Sep 28, 2007 6:00 pm
Location: Nampa, ID

Intersting finds on 12/1953 M38a1

Post by citabra »

In the restoration of my 12/1953 M38a1 I was disassembling the rear axle to clean up a nasty weld on the axle housing and the cover plate, check for serviceability and repaint.

After taking out the differential and drive pinion this copper jacket fell out and steel bullet fragments were stuck to the magnet on the drain plug. I then found an unrepaired bullet hole through the right brake backing plate. So I would conclude that the nasty welds were probably field expedient repairs.

If this jeep could talk I would really like to hear the story

Image

Image

Image

Image

Image
User avatar
evanso1975
Jeep Enthusiast
Jeep Enthusiast
Posts: 615
Joined: Sun May 09, 2010 6:00 pm
Location: North Yorkshire, UK

Post by evanso1975 »

Wow. That one through the backing plate just missed the eccentric; lucky shot (or unlucky, depending on your viewpoint!). 8O
Owen

1951 US Air Force M38
1944 F-1 1/2-ton Airdrome Trailer
1940 C15 Chevrolet CMP 11-cab
1939 DKW KS200 Motorcycle
MVT # 19406
User avatar
RICKG
Jeep Legend
Jeep Legend
Posts: 1752
Joined: Mon Aug 30, 2010 6:00 pm
Location: SO IDAHO

Post by RICKG »

Can you identify the caliber? The fragment on the
left looks like .30 cal carbine. Never know what
you'll find..
keep 'em rollin'
RICKG MC 51986 DOD 01-52, '50 CJ3a
User avatar
citabra
Member
Posts: 34
Joined: Fri Sep 28, 2007 6:00 pm
Location: Nampa, ID

Post by citabra »

I would agree that it is a .30 cal and probably steel core projectile fragments since all the gears, bearing and seals appear to be intact.

Obviously there is not way to confirm this but it could be 7.62x39 with a steel core projectile like the M43 or many others.
User avatar
wesk
Site Administrator
Site Administrator
Posts: 16468
Joined: Sun Apr 03, 2005 6:00 pm
Location: Wisconsin
Contact:

Post by wesk »

Many jeeps served out the last of their days posing for gun toters at military ranges. My son's unit still has M151's to shoot at on their range. Eventually the remains get hauled off to DRMO and get salvaged out. That axle may have come from a target jeep that was parted out through a salvage unit. In the 60's I also had the opportunity to pop a lot of holes in salvage vehicles on several ranges.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
User avatar
citabra
Member
Posts: 34
Joined: Fri Sep 28, 2007 6:00 pm
Location: Nampa, ID

Post by citabra »

I agree, it very well have been used on a range before being salvaged. It could have even been shot by a previous owner for whatever reason.

In reality I don't believe there is a way to accurately tell the history of this vehicle or this axle.

It makes no difference to me in this restoration, I just thought some folks may get a kick out of the find.
Post Reply