The reason my speedometer is apparently reading wrong

Discussion topics on Willys Overland M series vehicles
Post Reply
User avatar
Deadguy
Jeep Enthusiast
Jeep Enthusiast
Posts: 776
Joined: Wed Jun 08, 2011 6:00 pm
Location: Bellmore, NY
Contact:
Contact Deadguy

The reason my speedometer is apparently reading wrong

Post by Deadguy »

Is because I have a speedometer drive gear that is for the lower geared CJ5 axles. I need a 15 tooth count speedometer drive gear (the thing the speedometer cable feeds into on the transfer case) for my M38A1. Does anyone know where I can get one?
1952 M38A1
Marine core reinforced rear bumper, military transistorized turn signal upgrade, arctic heater, 11" drum brakes, 200L PTO winch, Huffy overdrive, deep water fording kit, RT 68 vehicle mounted radio, Trac Locs front and rear.
www.danhenk.com
Top
User avatar
jeepman
Member
Posts: 16
Joined: Thu May 20, 2010 6:00 pm

Post by jeepman »

Have you tried John at midwestmilitary.net?He lists 14 pages of M38A1 parts.Also says he has takeoff and other new parts availiable.Just a thought.
Top
User avatar
MODIFIED
Jeep Enthusiast
Jeep Enthusiast
Posts: 353
Joined: Thu Mar 27, 2008 6:00 pm
Location: BrOoKlYn

Post by MODIFIED »

sent you a pm.
Always Looking for M170 Parts and bits ;)
Top
Post Reply

Return to “Technical Knowledge Base”