According to the ORD 9, and if I understand it correctly, any MC#'s below 34151 had the dash plates individually mounted on the dash? In my restore I didn't see any evidence of holes in the dash other than the four that are there for the larger backing plate. My MC# is 29199 so I enter the unknown if maybe my tub isnt original or my MC# is wrong. I bought it with no plates present but have a title and there is a MC29199 stamped on the frame that matches the # on the title.
I don't really care, just an observation and I plan to put the plates on a backing plate then on to the dash.
With that, does anyone have the dimensions of the backing plate you can get to me?
Thanks
Dash data plate mounting question
- Bretto
- Jeep Legend

- Posts: 1390
- Joined: Tue Nov 23, 2010 6:00 pm
- Location: Orem, UT
- Xamon
- Jeep Enthusiast

- Posts: 593
- Joined: Mon Sep 17, 2012 6:00 pm
- Location: South East Saskatchewan
This might help. no tape handy but this is a scan of my plates.

yes I actualy put my plates in my scanner
yes I actualy put my plates in my scanner
Carievale Saskatchewan Canada
http://www.willysmjeeps.com/v2/modules. ... _album.php
http://www.willysmjeeps.com/v2/modules. ... _album.php
- RICKG
- Jeep Legend

- Posts: 1752
- Joined: Mon Aug 30, 2010 6:00 pm
- Location: SO IDAHO
- Bretto
- Jeep Legend

- Posts: 1390
- Joined: Tue Nov 23, 2010 6:00 pm
- Location: Orem, UT
- wesk
- Site Administrator

- Posts: 16468
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:
Did your dash have the heater duct hole in it to the right of the instrument cluster?
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
- Bretto
- Jeep Legend

- Posts: 1390
- Joined: Tue Nov 23, 2010 6:00 pm
- Location: Orem, UT
- wesk
- Site Administrator

- Posts: 16468
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:
That dash is newer than MC34151. Early model dashes that had the heater hole cut in the field were usually very crudely cut and not in that exact location.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
- Bretto
- Jeep Legend

- Posts: 1390
- Joined: Tue Nov 23, 2010 6:00 pm
- Location: Orem, UT
- wesk
- Site Administrator

- Posts: 16468
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:
34151 is a Sep 1951 unit.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php


