measurments

circleburner12 · Post by **circleburner12** » Mon Oct 15, 2012 12:37 pm

ive got a m38a1 and im needing the correct measurments for the 3/8 hole for the front bow for the windsheild rod to attach to. ive look and called mv vendors and all seem to have different measurements.

if anyone has a set of original bows, would you be so kind to post the correct measurents. thanks

shack · Post by **shack** » Mon Oct 15, 2012 6:10 pm

Hi Michael,
Mine is 25 inches center of rivet pin to center of hole.

circleburner12 · Post by **circleburner12** » Mon Oct 15, 2012 7:31 pm

thanks shack, lets see what other measurments are out there before wei start drilling. thxs

please post your measurments, maybe myself and others might be able to use the info. thxs

bluewatersailor · Post by **bluewatersailor** » Tue Oct 16, 2012 6:31 am

I measured my original top bow and got 63.75 cm (=25.09") from the center of the rivet to the center of the hole, thereby confirming Shack's data. Going the other direction, I measured 17 cm (=6.692") from the center of the hole to the centerline of the section of top bow that is horizontal when in use. Drill on! David

RICKG · Post by **RICKG** » Tue Oct 16, 2012 7:05 am

http://willysmjeeps.com/v2/modules.php? ... pic&t=7293
from a previous post

measurments

measurments

M38A1 TOP BOW MEASUREMENTS - confirm and cross-check