WTB MT-298

LoboMike · Post by **LoboMike** » Tue May 30, 2006 4:52 am

Subject says it all!

m38mc · Post by **m38mc** » Thu Jun 01, 2006 2:00 pm

Sorry I cant Help. All I have are Mt-299 and Mt-297.
But know I have a working VRC-10 in my M38.

LoboMike · Post by **LoboMike** » Fri Jun 02, 2006 4:53 am

Is the MT-297 available?

m38mc · Post by **m38mc** » Fri Jun 02, 2006 2:26 pm

Yes it is.

Bill_F · Post by **Bill_F** » Fri Jun 02, 2006 7:08 pm

Larry,
Are you selling an mt-299? I might be interested.

m38mc · Post by **m38mc** » Fri Jun 02, 2006 7:16 pm

Sorry Bill,
I am keeping the second one I have my Radio Room with a
second RT 68.

Bill_F · Post by **Bill_F** » Fri Jun 02, 2006 7:26 pm

Thought I would ask. A little of topic but can you send me some pics of your m38 with the winch mounted?

LoboMike · Post by **LoboMike** » Sat Jun 03, 2006 4:55 am

Larry,

Private email me the details on the MT-297 (lobomikem38@earthlink.net). If this works out I'll have an MT-299 available.

Thanx Mike

Bill_F · Post by **Bill_F** » Sun Jun 04, 2006 7:24 am

Mike keep me posted if you do have one available.

Post by **Ryan_Miller** » Sun Jun 04, 2006 9:14 am

Bill,

Check out the downloads section under winches.

There is an article there with photos of an installed winch.

It is not an all inclusive article, but the photos may help.

Bill_F · Post by **Bill_F** » Sun Jun 04, 2006 2:23 pm

I just want to see Larrys jeep with the winch on it. Larry has been very helpful since I first bought my m38.

LoboMike · Post by **LoboMike** » Mon Jun 05, 2006 6:06 am

Working with Larry on his MT-297. I want to mount an RT67 and an RT68 in order to RT at 10m. Can anyone tell me the differences between an MT-297 and an MT-298? I know I can accomplish this with an MT-298, not sure about the MT-297, "appears" to have one less channel in the mount, correct?

My goal is to remove the RT's from two MT-299's and put them in a single mount.

TIA