Induction hose support tube

RICKG · Post by **RICKG** » Wed Mar 06, 2013 11:26 am

Does anyone here have dimension specifics on the induction hose support
tube? Or perhaps 1 they're willing to part with?

Bretto · Post by **Bretto** » Wed Mar 06, 2013 3:09 pm

I sure wish I could help.
If I'd had to guess, its probably the same tubing as the top bows. 1" OD 16 guage. And I bet you know how I know that.

Kendall · Post by **Kendall** » Wed Mar 06, 2013 3:49 pm

What dimensions are you needing? The tube is 1"OD and 57" long. Do you need the measurements for the bends, etc?
I am assuming that since you posted a photo of the fording kit for the M38 that is what you are needing. I have an extra support tube for the M38A1 but that would not do you any good.
Kendall

RICKG · Post by **RICKG** » Wed Mar 06, 2013 4:13 pm

I was hoping to get measurements to possibly fab 1 up for an M-38.

OKCM38CDN · Post by **OKCM38CDN** » Wed Mar 06, 2013 4:50 pm

Contact Brent Mullins, h had some a while back...

G740 · Post by **G740** » Wed Mar 06, 2013 5:32 pm

Midwest Military has them in stock also.
John

Induction hose support tube

Induction hose support tube

Tube