HELP TO IDENTIFY MY TRAILER

[alexandrewillys51]

Hello friends,

Today I bought a trailer that belonged to the Brazilian Army and was auctioned.

I am wanting to identify your model, but has no data plate.
I'm wondering if this is a model M100 or BANTAM.

I would like the help of all of you and also ask that speak of the problems that they can see, and also the positives.

I appreciate the help from all of you.

hugs
Alexandre BRAZIL

[wesk]

The threaded shock mounts, small hole in right front frame for WWII style BO switch, no corner handles I'd say it was a WWII MBT. This conclusion can be supported a bit better if we saw the inside of the bed to determine if one drain or two. Also if you remove the left front spring mount bracket and find an ACS serial number on the bottom side of the frame rail that would confirm it as well.

Take a look at Chuck's 1/4 ton trailer ID guide.
http://jeepdraw.com/Chucks_Trailers.html

and Hubbard's guide:
http://bantamt3c.com/images/hubbard/Pages/Bantam.html

[alexandrewillys51]

Wes,

Thanks for the tips!

She only has a drain in the floor, as the photo I am attaching.


Do not quite understand where I can find the number ACS.
You could send a photo of the place?



Thank you for your attention.
hugs
Alexandre

[wesk]