Shackle Pivot Bearing

vuldub · Post by **vuldub** » Fri Jul 12, 2013 7:31 am

Is this bearing pressed into the spring? I'm going to replace the spring shackles (two of the grease nipples are missing and threads stripped -won't take an new nipple) and thought it might be worth replacing the pivot bolt and bearing.

RICKG · Post by **RICKG** » Fri Jul 12, 2013 8:26 am

check here
http://willysmjeeps.com/v2/modules.php? ... _album.php

vuldub · Post by **vuldub** » Fri Jul 12, 2013 10:30 am

Yes, I have those diagrams.
In this one:
http://willysmjeeps.com/v2/modules.php? ... _photo.php
Specifically, is "J" pressed into the spring? Threaded? Loose?

RICKG · Post by **RICKG** » Fri Jul 12, 2013 10:55 am

Press fit. TM9-1804B pg 150, par 138.

vuldub · Post by **vuldub** » Mon Jul 15, 2013 7:49 am

RICKG wrote:Press fit. TM9-1804B pg 150, par 138.

Thanks,