HELP RADIO VRC10 WILLYS M38

[alexandrewillys51]

Hello friends,
I will install a radio RT68 with a PP112 power supply, installed base mount MT299.
The configuration is like the diagram below.





I need pictures and measurements to manufacture the "CHANNEL" the wire through the passenger side until the source PP112. (NUMBER 17)

I also need to know if this radio configuration, I can use a CONTROL BOX C-375 to select the speaker LS166-U or the headset.

Thanks for everyone's help.
Alexandre

[wesk]

Midwest military has that channel in stock I believe.

[OKCM38CDN]

He sure does and it is NOS...

[alexandrewillys51]

Wes and OKCM38CDN,

Thanks for the info. I will contact Midwest.



I also need to know if this radio configuration, I can use the CONTROL BOX C-375 to select the speaker LS166-U or the headset.


thank you
Alexandre

[wesk]

You can look up components at:
http://www.nj7p.org/cgi-bin/millist2?na ... ode=system

Radio Set, AN/VRC-10

JAN Type: AN/VRC-10
Nomenclature: Radio Set
NSN: 5820-00-196-1721
Components: RT-68/GRC Receiver-Transmitter, PP-109/GR or PP-112/GR Power Supply, C-375/VRC Control Box, MT-327/GRC Mounting, GRA-6 Control Group, MS-117A Mast Section, AB-24/GR Mast Section, AB-15/GR Mast Base
Weight: 200
Mode: 30F3
Frequency Range: 38-54.9 MHz
Power Input: 12/24 VDC
Power Output: Low: 2, High: 16 W
Number of Channels: Continuous Tuning and Detent 170
Channel Spacing: 100 kHz
Replaced By: VRC-12
Remote Control: GRA-6
Part of: VRC-10
Antenna: AB-15 with MS-117 and AB-24/GR
Description: The VRC-10 provide FM radiotelephone facilities within the infantry frequency range of 38-54.9 MHz. It is designed for vehicular mounting.
Source: TM 11-611 Standardized Series of FM Sets, 15 May 51
Created: Wed Jul 12 19:24:04 2000
Last Modified: Wed Jul 12 19:24:04 2000

The 375 is the correct control box for the VRC-10



https://www.fairradio.com/catalog.php?m ... &item=3343