m38a1/ M170 Transfer case snubber to crossmember

bl5211a · Post by **bl5211a** » Sat May 10, 2014 9:06 am

Hello: Can someone post a photo of the m38a1/m170 transfer case snubber bolt from the bottom side of jeep. This is the one that goes thru the crossmember and transfer case and has rubber isolators.

Been scratching my head on this one as i have something goofy going on with the reassembly. Does the smaller isolator go on the bottom of the X-member? thinking it probably does.

Thanks

chrisk · Post by **chrisk** » Sun May 11, 2014 2:47 pm

Hi,
See photo gallery, page 1;look in my gallery "sinrisnekaf", complete Case support.
Hopes this helps.
Chris

bl5211a · Post by **bl5211a** » Sun May 11, 2014 7:40 pm

Thanks, photo answered my question,
Regards
Brian