starts, but accelerates rough..

Discussion topics on Willys Overland M series vehicles
Post Reply
User avatar
M38CDNdriver
Member
Posts: 7
Joined: Sun Mar 10, 2013 6:00 pm
Location: Winnipeg, Manitoba, Canada

starts, but accelerates rough..

Post by M38CDNdriver »

My M-38 will start fine, rev up fine but once put into gear it accelerates with a knocking sound and accelerates sluggishly. If I don't throttle too hard I can accelerate, be it slowly with no knocking sounds .....
This problem occurred quite fast and out of the blue
Any thoughts out there??

KGB
User avatar
wesk
Site Administrator
Site Administrator
Posts: 16467
Joined: Sun Apr 03, 2005 6:00 pm
Location: Wisconsin
Contact:

Post by wesk »

Try to be more specific in the knocking sound description. IE Rod knock, piston slap, spark knock etc. And try to indicate from about what location the knock seems to come from.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
User avatar
M38CDNdriver
Member
Posts: 7
Joined: Sun Mar 10, 2013 6:00 pm
Location: Winnipeg, Manitoba, Canada

Post by M38CDNdriver »

looks like with the engine also smoking good ...and I don't mean menthols maybe its time for a rebuild
User avatar
Bearbait
Member
Posts: 19
Joined: Fri Aug 23, 2013 6:00 pm
Location: Saskatchewan, Canada

Post by Bearbait »

Are you referring to blue smoke? Cause if it it is then you will be tearing the old girl down. If it's white smoke you should be noticing your antifreeze dropping in the radiator. But if it's brown or black smoke, look for fuel issues or a bad spark plug .
I hope this helps, if you are needing engine parts there is a guy in Brandon MB on kijjiji that has a bunch of 134 engine parts for sale.

Are you in Winnipeg or the surrounding area, I live near Russell MB, maybe we will see each other at a car show sometime.
Brad Young
Expensive habits:
1971 M38A1
1967 Mercury steps side short box
1978 Porsche 924
Post Reply