M38A1 parts vendor wanted

JohnC · Post by **JohnC** » Wed Nov 29, 2006 6:56 am

I have an early M38A1 (tilt grill etc) kit. I mean the body is off the frame, the rebuilt engine is on a cherry picker and I have seperated the boxes of parts into their various groups. I had turned in an order for parts to a vendor who strung me along for a week or so only to tell me most of the stuff was back ordered and would take about a month to get. Is there a reliable vendor or source for springs, cables, bumperetts, clutch parts,etc?
John Christoff
Texas

usma41 · Post by **usma41** » Wed Nov 29, 2006 8:54 am

Did you try Midwest Jeep parts? The owner is a member of this forum.

DJ · Post by DJ » Wed Nov 29, 2006 1:45 pm

http://www.midwestmil.com/

Bob_C · Post by **Bob_C** » Wed Nov 29, 2006 6:03 pm

John Bizal of Midwest Military is one of the best I have ever dealt with. Army Jeep Parts (George Baxter) also is a good guy. Both will get you what you need, and you will never have to gripe about parts not fitting correctly.

http://www.midwestmil.com
http://www.armyjeepparts.com

hillbilly21 · Post by **hillbilly21** » Thu Nov 30, 2006 7:10 pm

Curious as to who the vendor is as I will also stay away...I had the same problem with one of my FORMER vendors with a body kit and parts....