Ramsey military 50 & 50R winch system dimensions needed

Post by **wesk** » Sun Jul 27, 2014 10:34 am

Please post only good quality , readable illustrations of the part you need the dimensions for with a labeled key for responders to list dimensions against. See the first example below in the first reply. Try to use the ORD 9 SNL G-740 or _758 illustration or similar from another publication. Reference the part numbers. Responders should reply starting with the part number then simply list the requested dimensions using the call-outs listed by the original poster or offer a complete illustration with the needed dimensions.

Post by **wesk** » Sun Jul 27, 2014 10:36 am

Need dimensions for Brace PN RWM-148 ORD# 7994190

Post by **wesk** » Sun Jul 27, 2014 10:42 am

Please post dimensions for Shaft PN RWM-77

Post by **wesk** » Wed Jul 15, 2015 8:18 am

Still need these Dimensions!

And these:

Bill_F · Post by **Bill_F** » Mon Aug 31, 2015 6:26 am

Wes,

I have the drive line disconnected on my winch set up right now. I am not the best measurement taker but will try to get you some of the info you are looking for.

DanS · Post by **DanS** » Tue Jan 19, 2016 2:56 pm

Anyone have any of this info to post? Bill F? Thanks

Dan

Bill_F · Post by **Bill_F** » Wed Jan 20, 2016 7:40 am

I will try to work on some of it this weekend

DanS · Post by **DanS** » Wed Jan 20, 2016 12:15 pm

Greatly appreciated Bill!