Willys M38A1 M170 Seam Sealer

bl5211a · Post by **bl5211a** » Fri Apr 29, 2016 3:50 pm

Hello:

Does anyone know what portion of the body receives seam sealer, prior to final paint?
Brian
M170

oilleaker1 · Post by **oilleaker1** » Sat Apr 30, 2016 6:32 am

I sealed mine where the floor meets the sidewalls. The absolute most important areas are in the rear wheelwells where the rear tire throws water forward onto the little shelves. It basically funnels water into the toolbox and under the gas tank. I make sure and seal the corners and up the sides in there. Cool part is you can use a bucket with a small rag and water to smooth it all out very nice and professional. Once it dries, you are good to go. John

bl5211a · Post by **bl5211a** » Sat Apr 30, 2016 7:36 am

Hi, thanks for the feedback much appreciated.