M170 Late battery box lid hardware

bl5211a · Post by **bl5211a** » Sun May 01, 2016 8:36 am

Hi:

Does someone have the part numbers for the late style battery box lid hardware.

trying to figure out the footman loop mounting hardware (Screws and nuts for the footman loops)

Brian
M170

4x4M38 · Post by **4x4M38** » Sun May 01, 2016 11:33 am

Page 322 of your ORD 9 SNL G-758 available on the downloads at left:

WO-684730 LOOP, footman, drilled, 2.120 in. (battery box cowl lid)
(used on vehicles after serial No. 63252)

155937 BOLT, MACHINE, cross recess-fl-hd, S, cd- or znpltd,
No. 10 (0.190)-24NC2 x W

271166 NUT, hex, ext-teeth-lock washer, S, cd- or zn-pltd,
No. lo-24NC-2A

It looks like most of the footman loops were attached with this hardware.

Take care,

4x4M38 · Post by **4x4M38** » Sun May 01, 2016 11:42 am

Sorry fat fingers. The W should be 1/2.

1/2" long.

bl5211a · Post by **bl5211a** » Sun May 01, 2016 12:29 pm

Thanks! I was looking in group 6.
Regards, Brian

4x4M38 · Post by **4x4M38** » Sun May 01, 2016 1:41 pm

Don't feel bad, it took me a while to find it!