Crown Pulley doesn't fit

timjuhl · Post by **timjuhl** » Mon Nov 07, 2016 4:04 pm

I ordered a replacement crankshaft pulley from Quadratec (mfg by Crown) and it did not fit. It's a double pulley and the dimensions are such that it rubs against the timing gear cover. I only needed the forward pulley so to make it work I had to separate the back pulley and remove it. It's kinda cobbled up but it was either do that or throw a tarp over the Jeep while I tried to track down a good original one.

G740 · Post by **G740** » Mon Nov 07, 2016 6:21 pm

Midwest Military makes a correct double groove pulley for the 38 and A1 applications.
John