Top Bow bracket hole size...

Jeff_Lee · Post by **Jeff_Lee** » Fri Jul 14, 2017 7:53 am

I am recovering the military holes in my M38 tub that have been welded up by PO's.

For the large 3 bolt topbow brackets that fit on the quarterpanels, what is the diameter of the wing bolt clearance hole? Looks like it is about 1", but want to check if somebody can give me a original dimension.

Thanks, Jeff

Post by **wesk** » Fri Jul 14, 2017 8:59 am

Have you been thru my Photo album yet? 100's of technical photos there.
http://www.willysmjeeps.com/v2/modules. ... _album.php

Edited to indicate new dimension of 1.117"

4x4M38 · Post by **4x4M38** » Fri Jul 14, 2017 10:18 am

Hello Jeff,
Mine are right at 1-1/8".

Take care,

radtech · Post by **radtech** » Fri Jul 14, 2017 9:31 pm

On my #MC10675 the holes are exactly 1".

RICKG · Post by **RICKG** » Sat Jul 15, 2017 9:00 am

1.12 on MC51986

Jeff_Lee · Post by **Jeff_Lee** » Mon Jul 17, 2017 12:19 pm

Thanks Gentlemen!
Jeff

Post by **wesk** » Fri Jul 21, 2017 11:49 pm

1.117" on my 51 M38