Radio power feed harness instalation

Dirtryder · Post by **Dirtryder** » Tue Jul 25, 2017 6:02 pm

I'm installing a radio power feed harness kit in my M38. I've got the receptacle and groundcable attached correctly as per Wes's photos in his albums:

http://willysmjeeps.com/v2/modules/gall ... d=Scan0003

However I can't find any information or pictures for the routing of the power wire between the 90 degree conduit connector at the cowl battery box and the cowl support. From Wes's picture it looks like the wire heads up the middle of the cowl support but on my Jeep that just dead ends at the bottom of my glove box. My Jeep appears to have had bubba repairs to the glove box so perhaps they blocked off potential cable routing locations.

Thanks for any help,
Justin

Post by **wesk** » Tue Jul 25, 2017 10:55 pm

Dirtryder · Post by **Dirtryder** » Wed Jul 26, 2017 6:57 am

Perfect!
Thanks Wes, that's exactly what I needed. I don't know how I could keep this old Jeep running without the wealth of knowledge on this site.