Parts vendors.

Reviews and Comments on M Series Vehicle Parts: NOS, Reproduction, etc.

Moderators: TomM, wesk

Post Reply
User avatar
billybob
Member
Posts: 254
Joined: Tue Apr 19, 2011 6:00 pm
Location: mid missouri

Parts vendors.

Post by billybob »

I tried calling Midwest Military, [952 440 8778] 4 different times today and all that happened was, it would ring a few times and then started a screeching sound that hurt my ears. Then I tried Army Jeep Parts,[215 269 5014] also 4 different times and All I got was voicemail. I don't do business like that. If they want my business They had better answer the phone. There are plenty of vendors out there.
Last edited by billybob on Sat May 12, 2018 4:46 am, edited 1 time in total.
1952 M-38 # 53623 - 2-52. M 416 trailer.
User avatar
jeeptj1
Member
Posts: 143
Joined: Thu Aug 19, 2010 6:00 pm
Location: Illinois

Vendors

Post by jeeptj1 »

That noise usually is associated with a fax number instead of a phone number in my experiences.
52 m38
User avatar
Xamon
Member
Posts: 593
Joined: Mon Sep 17, 2012 6:00 pm
Location: South East Saskatchewan

Post by Xamon »

just looked and you appear to have the correct number for MWM but just for giggles did you try the fax number? someone might have gotten something mixed up somewhere.
User avatar
billybob
Member
Posts: 254
Joined: Tue Apr 19, 2011 6:00 pm
Location: mid missouri

Parts vendors.

Post by billybob »

It's very possible. I'll check my phone and if I made a mistake, I'll certainly apologize to them for my mistake.
1952 M-38 # 53623 - 2-52. M 416 trailer.
User avatar
4x4M38
Member
Posts: 3487
Joined: Thu May 29, 2014 6:00 pm
Location: Texas Hill Country

Post by 4x4M38 »

Before we flame two of the best suppliers in the country a couple of breaths and a little recon will show that one of the largest MVPA shows and fleamarkets is this weekend in Aberdeen. May 10-12.

That means they probably travelled on Wednesday to set up.

Granted, a fax machine kicking in after several unanswered rings is problematic, but in the past with both vendors if I left a message
John or Dan, or George eventually called me back.
User avatar
4x4M38
Member
Posts: 3487
Joined: Thu May 29, 2014 6:00 pm
Location: Texas Hill Country

Post by 4x4M38 »

And yes, there are plenty of suppliers out there,
but few of the caliber of these two.
User avatar
whydahdvr
Member
Posts: 647
Joined: Thu Jul 17, 2008 6:00 pm
Location: Melrose, MA and Santa Fe, NM

Post by whydahdvr »

You can also send an email with details. They get back to you on anything you order or any questions you have. I've done a lot of business with George at AJP that way, via email or over the phone.
My guess is they were traveling and someone goofed on the phone line answering service vs the fax. Sometimes fax lines get stuck in the receiving or sending mode... Modern technology. Blame it on the computer/micro-chip.

Shoot George or John an email and let them know what you're looking for and your time frame. They'll get back to you quickly.
KaiserWillys is a bigger operation, granted, but they don't always have the same quality parts as AJO or MWM. And are sometimes more expensive than either of those. John and George have been leaders and instrumental in creating high quality, as good or better than NOS, parts - in my experience....
Patience... These jeeps have been around a long time and a couple days longer won't break the restoration process. :-)
North Shore, MA
Santa Fe, NM
1942 GPW
1952 M38
1964 Apollo 5000 GT

De Opresso Liber
User avatar
billybob
Member
Posts: 254
Joined: Tue Apr 19, 2011 6:00 pm
Location: mid missouri

Parts vendors

Post by billybob »

I'm man enough to say, I made a mistake when calling MWM. I had the number written down correctly but I hit the wrong number by mistake. I now have that corrected. When I call in my order I'll apologize to him for being such a dumba++.
1952 M-38 # 53623 - 2-52. M 416 trailer.
User avatar
G740
Member
Posts: 500
Joined: Thu Jan 26, 2006 6:00 pm

Phone

Post by G740 »

No need to apologize. Glad to have you call. Just to be sure, we have 2 lines open most of the time at 952-440-8778. You can always try the metal shop line if there is a problem too. That is 952-440-6885. Use this one only if you have to.
John
User avatar
billybob
Member
Posts: 254
Joined: Tue Apr 19, 2011 6:00 pm
Location: mid missouri

Parts vendors.

Post by billybob »

Thank you John. Again it was my fault. I need a fording plate for a 52 M38. I'll call again Mon or Tues. Thanks.
1952 M-38 # 53623 - 2-52. M 416 trailer.
User avatar
4x4M38
Member
Posts: 3487
Joined: Thu May 29, 2014 6:00 pm
Location: Texas Hill Country

Post by 4x4M38 »

Fording plate....
User avatar
billybob
Member
Posts: 254
Joined: Tue Apr 19, 2011 6:00 pm
Location: mid missouri

Parts vendors.

Post by billybob »

Brian, Google, M38 fording cable plate. Several vendors have them. Wes talked about them several years ago.
1952 M-38 # 53623 - 2-52. M 416 trailer.
User avatar
4x4M38
Member
Posts: 3487
Joined: Thu May 29, 2014 6:00 pm
Location: Texas Hill Country

Post by 4x4M38 »

Ah. You left out the cable part...

The dash plate I’m guessing?

John’s is sharp!
User avatar
billybob
Member
Posts: 254
Joined: Tue Apr 19, 2011 6:00 pm
Location: mid missouri

Parts vendors.

Post by billybob »

Yeah, I think John's matches the original pretty darn good. I have the original one but all the black background is gone and it'd hard to read.
1952 M-38 # 53623 - 2-52. M 416 trailer.
Post Reply