m38 distributer advance weights

nepperjepper · Post by **nepperjepper** » Mon May 28, 2018 10:17 am

Looking for a set of advance weights for the m38 or m38a1 24 volt distributer.
Thanks in advance Jeff

Post by **wesk** » Mon May 28, 2018 11:16 am

You don't don't see them often. Last I recall were offered by the dealer in the Netherlands.

It may be helpful to review this old post: http://www.willysmjeeps.com/v2/modules. ... 4244#64244

The weights Autolite PN IGC2168L, ORD# 7706790, WO# A9314, NSN 2920-00-495-3301 are the same for both distributors.

The springs Autolite PN IGE24 or the set IGE24S, ORD# 7330828, NSN 2920-00-358-7800 are used in the IAU4006UT distributor & the two earlier remote radio filter distributors.

The springs Autolite PN IGB284 or the set IGB284S, ORD# 7376393, NSN 5340-00-350-2288 are used in the IAU4006AUT distributor.

If you google the NSN's you'll get a lot of hits.
2920-00-495-3301 individual weight
2920-00-238-5448 set of two.

nepperjepper · Post by **nepperjepper** » Mon May 28, 2018 2:22 pm

Thanks Wes
I knew My chances were slim of finding any. Mine are all wallered out. The MVPA convention is in a couple weeks and maybe I'll find some There..Jeff