


I had a set of buckets from a Humvee we made fit.


A fresh coat of OD #24087

For headlights I ordered a cheap set of 7" H4 conversion lights from Amazon so that we could have an open spot to mount some 120v LED bulbs.

Luckily the lights came with a set of plastic block-off plugs for the light sockets which we were able to modify to hold a set of small light candelabra sockets with small LED bulbs intended for use in refrigerators. That way they will snap right into the back of the lights using the stock clips.

All mounted up and a test of how well the lights will work.

We added green LED rope light along the back edge and with the way it will mount will leave about a 4" gap to the wall which should make a nice backlit glow.

We finished the project on Saturday and got it hung in his room before all his buddies came to spend the night. It was a big hit and all his buddies liked it.




All in all it was a great father son project and I'm glad he came up with it. It's always fun when Zach wants to spend time in the garage with his old man!