M38a1 / m170 battery box

Discussion topics on Willys Overland M series vehicles
Post Reply
User avatar
bl5211a
Jeep Enthusiast
Jeep Enthusiast
Posts: 344
Joined: Wed Dec 27, 2006 6:00 pm
Location: NC

M38a1 / m170 battery box

Post by bl5211a »

Hi , does anyone know if the black protective tar in the battery box was a field maint procedure or did they apply the coating in the factory ?
Brian
M38a1 m170
Brian
1955 M170
1940 BSA M20
jnissen
Contributor
Contributor
Posts: 93
Joined: Fri May 11, 2018 6:00 pm
Location: Austin Texas
Contact:

Re: M38a1 / m170 battery box

Post by jnissen »

bl5211a wrote:Hi , does anyone know if the black protective tar in the battery box was a field maint procedure or did they apply the coating in the factory ?
Brian
M38a1 m170
Believe it was a recommended procedure in the field. We applied undercoating on ours hoping to protect the interior from potential corrosive fumes. Make sure you have the vent hose in place and that should help.
Jim Nissen
1955 M38A1
Patent Plate MD74784
Engine Plate MD85578
Contrived Hood Number 20974784
User avatar
bl5211a
Jeep Enthusiast
Jeep Enthusiast
Posts: 344
Joined: Wed Dec 27, 2006 6:00 pm
Location: NC

Post by bl5211a »

Thanks , we are slowly doing a factory restoration and didn’t know if coating was applied at Willy’s or as a field maint .
Our m170 had it , but we removed it during stripping process . Thinking of leaving it off for now .
Brian
1955 M170
1940 BSA M20
Post Reply