At one point, surfing around various Jeep sites, I tripped over a post about a shop in PA that specialized in rebuilding these L-134 engines. I'm thinking about having mine rebuilt, but now I can't find the darn post!
I'm actually in MD, but PA would be close enough.
Does anyone on this board know of such a shop in the mid-atlantic region?
L-134 Rebuilding Shop in PA
Moderators: TomM, Moderator, wesk
-
52_M38
- Member
- Posts: 13
- Joined: Sat Dec 30, 2006 6:00 pm
- Location: Annapolis, MD
L-134 Rebuilding Shop in PA
Thanks, Bob
'52 M38
'52 M38
-
steveh
- Member
- Posts: 31
- Joined: Thu Nov 09, 2006 6:00 pm
- Location: Somerset, Ohio
Hi Bob
Mine had a hole in the side of the block where a rod went through and I took to a commercial industrial rebuild shop and they fixed the hole and rebuilt the engine. They did an outstanding job. They are in Columbus Ohio. A ways away from MD, however, if you can't find anything else, I highly recommend this company. If you are interested, get back to me and I will put you in touch with them.
Steve
M-38 61702
Mine had a hole in the side of the block where a rod went through and I took to a commercial industrial rebuild shop and they fixed the hole and rebuilt the engine. They did an outstanding job. They are in Columbus Ohio. A ways away from MD, however, if you can't find anything else, I highly recommend this company. If you are interested, get back to me and I will put you in touch with them.
Steve
M-38 61702
-
Bob_C
- Site Administrator
- Posts: 271
- Joined: Sat Apr 02, 2005 6:00 pm
- Location: Chester County, PA