Parting Out M38

Chjames3 · Post by **Chjames3** » Tue Apr 21, 2020 8:12 am

This jeep was originally an M38 but it is a combination of CJ2A/CJ3A/M38 parts. The tub is toast and the seats in the photo are already sold. Can send pictures of anything you have specific questions on.

Other Parts
F-134 Engine - Complete and runs but needs new gaskets - SOLD
Original Windshield Frame (a couple of minor rust spots)
Left Fender (Minor rust where it connects to the side step) - Pending
Right Fender (from a CJ3A) needs new fender brace
Hood
Front and Rear Drive shafts
Dana 27 Front Axle - SOLD
Dana 41 Rear Axle - SOLD
Brake Assemblies
Parking break assembly
Misc M38 Floor Cover Panels
Misc Tub Brackets
24v Generator (in good shape but no clue if it works)
F-134 Starter - SOLD
F-134 Bell Housing - SOLD
F-134 Generator - SOLD
T-90 Transmission Top Shifter Assembly (Civilian)
GPW or CJ2A Steering Assembly (Ford Script on Steering Box) - SOLD
M38 Frame (front was modified and lengthened to mount a winch at some point) - SOLD
M38 Radiator
Front Bumper - SOLD
Exhaust system
A ton of other misc parts/takeoffs. Just ask if you are looking for anything specific.

Can ship the smaller items. Larger items like the engine, frame, axles, etc. will have to be local pickup in Southern Arkansas

RICKG · Post by **RICKG** » Tue Apr 21, 2020 8:56 am

Rear lift shackle bracket? Bracket only..

Roughneck · Post by **Roughneck** » Tue Apr 21, 2020 9:48 am

pm sent

Chjames3 · Post by **Chjames3** » Tue Apr 21, 2020 9:49 am

Sorry, but it doesn't have anything that mounts the rear bumper

4x4M38 · Post by **4x4M38** » Tue Apr 21, 2020 10:28 am

Pm sent.

dpcd67 · Post by **dpcd67** » Tue Apr 21, 2020 5:05 pm

I want the glove box opening chopped out (with an angle grinder and a cut off wheel) with one inch or so of sheet metal around it.
I'll PM you.

dpcd67 · Post by **dpcd67** » Sat Apr 25, 2020 9:40 am

I am so sorry; I just looked at the last post was recent and didn't notice the original post was years ago.......

mdainsd · Post by **mdainsd** » Sat Apr 25, 2020 12:57 pm

OP posted in it this week.

Conditions the hood?

4x4M38 · Post by **4x4M38** » Sat Apr 25, 2020 8:40 pm

April 21, 2020 is not years ago?

Naugha · Post by **Naugha** » Mon Apr 27, 2020 10:08 am

Hi.
Is that a M38 rear seat frame in the pic ?
If so .... Condition, Price & shipping. Thanks for the info.

Naugha · Post by **Naugha** » Mon Apr 27, 2020 10:11 am

Oops... seats already sold.
Do you have any of the original M38 rims ??

DFoley · Post by **DFoley** » Wed May 27, 2020 11:14 pm

Hello, I'd be interested in the hood. Can you PM a pic or two of the hood? What price would you want for it?

gunsmokejohn · Post by **gunsmokejohn** » Mon Aug 31, 2020 6:15 pm

How much for the window frame I would like a picture.