M38 Parts for sale

Mike_B · Post by **Mike_B** » Wed Sep 16, 2020 7:54 pm

I just got two pickup truck loads and a 18' car trailer heaped full of used M38 parts.

I'm new to the M38's so bear with me as I try to figure this all out.

frame
24v starters, 24v Generators, 24v Distributors and 24v Regulator
Engines, transmissions etc.
Down Draft Carbs (WO?), oil bath air filters
Trans covers, grilles, right fender, WILLYS hood
Steering, bellhousings, motor mount plates, bellhousing adaptor plates, trans cross members etc.

Lots of little things that I haven't ID-ed yet.

Listed on Craigs List

https://smd.craigslist.org/pts/d/hughes ... 29671.html

Mike B

Roughneck · Post by **Roughneck** » Thu Sep 17, 2020 7:42 pm

im jealous of your haul lol but in your 3rd picture on craigslist there is a gas tank and it looks to be an m38 tank and if so lets talk turkey and of course it would need to be shipped

Mike_B · Post by **Mike_B** » Thu Sep 17, 2020 11:22 pm

Yes, that's a M38 tank, but the bottom is completely missing/rusted off...it's only there because I want the fill extension out of it for my M38...the rest is scrap.

Thanks for looking!

Mike B

Mike_B · Post by **Mike_B** » Sun Sep 20, 2020 12:21 pm

UPDATE;

All of the 24v stuff has been sold as well as the Oil Bath Air Filter.

Mike B

RonD2 · Post by **RonD2** » Fri Oct 09, 2020 8:42 pm

Hi MIke,
Do you by chance have a Military Standard (Junior) oil filter (canister type that takes the internal paper element) in good shape?

Mike_B · Post by **Mike_B** » Sat Oct 10, 2020 9:00 pm

Ron,

I have one, but it might be sold...I'll know one way or the other tomorrow and report back to you.

Mike B

Mike_B · Post by **Mike_B** » Sun Oct 11, 2020 6:37 pm

Ron, the filter did not sell.

Stamped "Military Standard Filter" and it's 5" in diameter and about 7" tall from the top cover bolt to the bottom nipple.

Send me your email and Ill send you pictures of what I have.

Mike B

RonD2 · Post by **RonD2** » Sun Oct 11, 2020 7:03 pm

Thanks Mike. PM sent with email address.

Post by **wesk** » Sun Oct 11, 2020 8:18 pm

Mike_B · Post by **Mike_B** » Mon Oct 12, 2020 3:03 pm

I've sold a lot so I updated the pictures on Craigslist.

Still have a frame, CJ windshield frame, column shift trans/transfer setup, tailgate, "Willy's" script hood, bare block stamped RMC, long block with "industrial" head, flywheels, manifolds, Solex carb, WO carbs, Dana 25 front and Dana 44 rear axles, brake/clutch pedal assemblies and lots of little stuff.

Mike B

Mike_B · Post by **Mike_B** » Sun Nov 29, 2020 2:30 pm

All three carburetors and the starters have been sold.

At this point I'm ready to be done with all these extra parts...anyone want to buy the whole lot for a good price?

Message me and let's make a deal!

Mike B

Mike_B · Post by **Mike_B** » Mon Nov 30, 2020 5:13 pm

Here's my active Craig's List link...

https://smd.craigslist.org/pts/d/hughes ... 52680.html

Mike B