Douglas 2 to 1 connectors

Trip · Post by **Trip** » Thu Jul 08, 2021 5:35 am

Well, I need help again.

I am needing the internal connector parts for the 2 to 1 Douglas connectors. 14 gauge seems to be the most common.

I have the shells, the little metal grommets and the rubber grommets. What I need is the 2 to 1 connectors. I understand an M38 requires six 2 to 1 connectors. It appears there are two rubber connectors in each assembly.

If anyone has 6 assemblies (or knows where I can purchase) the internal connectors, I would appreciate a heads up.

Trip

OKCM38CDN · Post by **OKCM38CDN** » Thu Jul 08, 2021 6:23 am

Check with MWM, he may have them.

I was able to get the internals from Kaiser Willys earlier this year. bit expensive but you got to have them...

https://www.kaiserwillys.com/vehicle/52 ... -m38-m38a1

Hope this helps...

4x4M38 · Post by **4x4M38** » Thu Jul 08, 2021 7:25 am

Yes call John at Midwest Military. They have hundreds of parts available not on their website.

RonD2 · Post by **RonD2** » Thu Jul 08, 2021 11:28 am

This might also help...... http://www.ucominc.com/term_conn.html

Trip · Post by **Trip** » Fri Jul 09, 2021 6:16 am

Just FYI. MWM cannot help at this time.

Trip

kenperkins · Post by **kenperkins** » Fri Jul 09, 2021 6:40 am

UCOM shows N/A for 14 ga. grommets

BCA · Post by **BCA** » Fri Jul 09, 2021 9:37 am

Trip: PM me if you still need connectors. I have all Douglas connectors in stock. ...... Brian.

Trip · Post by **Trip** » Fri Jul 09, 2021 3:38 pm

Found what I needed.

Thanks to all (again)!

Trip

RonD2 · Post by **RonD2** » Fri Jul 09, 2021 8:13 pm

I thought he was asking about connectors not grommets.

Trip · Post by **Trip** » Fri Jul 09, 2021 8:19 pm

I needed and was searching for the internal parts but any port in a storm. I found complete assemblies so I pulled the trigger and they are on their way.

Trip