Spacers for gas can holder
What are the dimensions for the Gas can bracket/holder spacers? I would like to make me some. Also what diameter is the bolt that is used to hold it on with?
Gas can bracket/holder spacers
Moderators: TomM, Moderator, wesk
-
RonD2
- Member
- Posts: 2065
- Joined: Wed Oct 01, 2014 6:00 pm
- Location: South Carolina, Dorchester County
Spacers are listed in the M38 ORD9 on page 307 as G740-7375354 without dimensions.
The same spacers are listed in the M38A1 ORD9 on page 339 with dimensions.
The bolt size is listed on page 304 of the M38 ORD9.
Can they be made this cheaply? https://shop.midwestmilitary.com/produc ... pacer-set/
The same spacers are listed in the M38A1 ORD9 on page 339 with dimensions.
The bolt size is listed on page 304 of the M38 ORD9.
Can they be made this cheaply? https://shop.midwestmilitary.com/produc ... pacer-set/
Ron D.
1951 M38 Unknown Serial Number
1951 M100 Dunbar Kapple 01169903 dod 5-51
“The only good sports car that America ever made was the Jeep."
--- Enzo Ferrari
1951 M38 Unknown Serial Number
1951 M100 Dunbar Kapple 01169903 dod 5-51
“The only good sports car that America ever made was the Jeep."
--- Enzo Ferrari
Ron, hit it right on the pin head! If I might add the manuals referred to by Ron are found free at:
1 - M38A1: http://www.willysmjeeps.com/v2/modules. ... oad&cid=63
2 - M38: http://www.willysmjeeps.com/v2/modules. ... oad&cid=62
1 - M38A1: http://www.willysmjeeps.com/v2/modules. ... oad&cid=63
2 - M38: http://www.willysmjeeps.com/v2/modules. ... oad&cid=62
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php