M38a1 turn signals

Discussion topics on Willys Overland M series vehicles

Moderators: TomM, Moderator, wesk

RonD2
Member
Posts: 2065
Joined: Wed Oct 01, 2014 6:00 pm
Location: South Carolina, Dorchester County

Post by RonD2 »

wesk wrote:Ron, My apologies for insulting your intelligence with my typo.
No worries Wes. I was neither insulted or offended.
I didn't realize the extent you manipulated the drawing.
It wasn't obvious it was your mistake.
Ron D.
1951 M38 Unknown Serial Number
1951 M100 Dunbar Kapple 01169903 dod 5-51

“The only good sports car that America ever made was the Jeep."
--- Enzo Ferrari

RonD2
Member
Posts: 2065
Joined: Wed Oct 01, 2014 6:00 pm
Location: South Carolina, Dorchester County

Post by RonD2 »

CapnDan wrote:I was wanting to add turn signals/flashers and the right stop light without cutting into my Vintage wiring harness. So, I am asking how best to do that, plug into existing harness with connectors or run new dedicated turn signal wires and stop light wires.
Danny,
I think maybe you answered your own question?
If you don't want to cut (or plug) into the existing harness --- the remaining solution is to run new wire.
Ron D.
1951 M38 Unknown Serial Number
1951 M100 Dunbar Kapple 01169903 dod 5-51

“The only good sports car that America ever made was the Jeep."
--- Enzo Ferrari

Post Reply