Speedo drive cable

ROBCDN3 · Post by **ROBCDN3** » Thu Jul 19, 2018 5:18 pm

On my M38a1 speedo the drive cable has different ends one is square and the other is a long pointy one. which end goes where , to trans and to the speedo. 71 M38a1 cdn 3 c Rob Thanks in advance

Post by **wesk** » Thu Jul 19, 2018 10:37 pm

Square in the speedo and pointy long one with small fin in the drive gear.

This illustrates connecting the stock drive gear to a sender for an electric speedo but the shortened drive cable accurately represents the tips of the stock cable.

ROBCDN3 · Post by **ROBCDN3** » Fri Jul 20, 2018 6:56 am

Thanks Wes My speedo is the problem then it has a round hole , must have been damaged years ago speedo was always very bouncy.
Rob 1971 M38a1cdn3c

Post by **wesk** » Fri Jul 20, 2018 8:29 am

The entrance to the square drive hole is round on all of them.

ROBCDN3 · Post by **ROBCDN3** » Sun Jul 22, 2018 7:19 pm

Thanks Wes Mine started working again will leave it alone till it stops 71 M38a1 cdn3 c Rob