exploded view of M38 card.

shack · Post by **shack** » Mon Dec 01, 2008 8:16 pm

Hey guys,
Im still learning my way around the manual downloads so could someone point me toward the carburator breakdown guide? Or tell me which manual it's in? I'm going to try my hand at rebuilding one!
Thanks a lot,
shack

Post by **wesk** » Tue Dec 02, 2008 12:29 am

http://www.willysmjeeps.com/v2/modules. ... tit&lid=71

whydahdvr · Post by **whydahdvr** » Wed Dec 03, 2008 11:55 am

Wes and everyone, this may be a silly question but how difficult is it for someone with no real experience of working on a carburetor to adjust the float on the carb here? From reading the TM and this link it seems fairly simple but not having done it before.... Thanks.
-Josh

Rick_L · Post by **Rick_L** » Wed Dec 03, 2008 3:35 pm

Its not hard, just make sure you have another gasket set on hand.

whydahdvr · Post by **whydahdvr** » Wed Dec 03, 2008 6:51 pm

That makes sense so I should get one before I start. Thanks! What about the bending of the lip of the float?

Rick_L · Post by **Rick_L** » Wed Dec 03, 2008 7:43 pm

I don't remember it taking much pressure, just a screwdriver with a head thin enough to fit under it.