Brake Bleed Valve broken off wheel cylinder

dynodave · Post by **dynodave** » Mon Aug 31, 2009 6:40 pm

Finally got the engine up and running on my M38A1 so I decided it was time to concentrate on the brakes. I was going to bleed the brake lines and went to go find the bleed valves. Well wouldn't you know it, I crawled under the jeep and the first wheel I look at had the valve broken off. There is a hole where it used to be and that's it. I looked through the bag of misc bolts and parts that I saved from cleaning out the jeep and it appears that I have the valve. There are no threads of any kind left. It looks like it was sheared off. Any ideas on what to do? Do I need to buy a new wheel cylinder or is it worth trying to tap it? Any help is apprecicated.

oreo3156 · Post by **oreo3156** » Mon Aug 31, 2009 8:10 pm

When it comes to brakes, safety first in my books. Spend the $40 and replace it.

Post by **wesk** » Mon Aug 31, 2009 11:21 pm

The remainder of the bleeder screw can usually be removed with a special tool. If the cylinder is very clean and the bore is in very good shape then it may be worth the effort but this is usually not the case.