How far does your break pedal move?

linx310 · Post by **linx310** » Thu Jan 21, 2010 11:20 am

I can't tell if mine on my M38A1 is correct. I looked at the manual and have the long free play adjusted out of it. Now my pedal only moves a couple on inches when I press down on it. It seems to stop ok, I was even able to screech the tires in one stop test.

Does any one have any video showing the travel of their break pedal?

When I get home tonight I will try to take a video of mine.

Post by **wesk** » Thu Jan 21, 2010 11:49 am

Vertical free play about 0.5". Corrected from 1.5"

Sideways more than an inch and you should start looking at a bushing kit and washer adjustments. Theres some data in the downloads on the pedal fitment.

linx310 · Post by **linx310** » Thu Jan 21, 2010 4:03 pm

Here is a video of how far my pedal moves

http://www.youtube.com/watch?v=ulEvBFOdFQ4

About 3/4 of inch with the free play taken out.

Post by **wesk** » Fri Jan 22, 2010 12:44 am

I corrected my typo above. What you have will work ok. How much side play or rock does the pedal have?

linx310 · Post by **linx310** » Fri Jan 22, 2010 7:15 am

I corrected my typo above. What you have will work ok. How much side play or rock does the pedal have?

Very little.

Post by **wesk** » Fri Jan 22, 2010 8:31 am

Then you are good to go. Is your clutch pedal free play set correctly at 1.5"?