Kaiser Engine ??

Discussion topics on Willys Overland M series vehicles
Post Reply
bigcol
Contributor
Contributor
Posts: 63
Joined: Thu Mar 26, 2009 6:00 pm
Location: Melbourne, Australia

Kaiser Engine ??

Post by bigcol »

1951 MC 11116 work in progress.

Seeking info on engine identification.

After cleaning have just located the engine number stamped above waterpump with matching numbers on tag riveted to block below the distributor.

Engine is Kaiser Supersonic # 3530838. Note no MC or RMC so gather it may be a civilian engine.

Also noted the absence of water pump bypass hose to the cylinder head.

Any ideas??
User avatar
wesk
Site Administrator
Site Administrator
Posts: 16469
Joined: Sun Apr 03, 2005 6:00 pm
Location: Wisconsin
Contact:

Post by wesk »

Most likely a Kaiser/Frazier automobile engine.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
bigcol
Contributor
Contributor
Posts: 63
Joined: Thu Mar 26, 2009 6:00 pm
Location: Melbourne, Australia

Post by bigcol »

Is it a CJ3a engine?

How does it differ with M38 Motors?

rgds

Col
User avatar
wesk
Site Administrator
Site Administrator
Posts: 16469
Joined: Sun Apr 03, 2005 6:00 pm
Location: Wisconsin
Contact:

Post by wesk »

No. A CJ3A engine would have a serial number 3JXXXXXX. It is a Kaiser or Frazer automobile engine that someone put in your jeep. For a while Kaiser and Frazer autos used the WEillys engine.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
User avatar
BobW
Moderator
Moderator
Posts: 225
Joined: Sun Apr 03, 2005 6:00 pm
Location: Monticello, NY
Contact:

Post by BobW »

The engine is probably from a Henry-J. Do you have a photo of the rear flange area of the engine?

Thanks,
Bob W. Monticello, NY. 1952 CJ3A, 1952 M38, 1950 CJV-35/U
User avatar
toojeeps
Contributor
Contributor
Posts: 69
Joined: Sat Aug 23, 2008 6:00 pm
Location: Paris KY

How does it differ with M38 Motors?

Post by toojeeps »

The front plate and motor mounts are different and the intake manifold is different. Both can be swapped out the the M38 parts.
Post Reply