Drain plugs

Discussion topics on Willys Overland M series vehicles
Post Reply
User avatar
Deadguy
Jeep Enthusiast
Jeep Enthusiast
Posts: 776
Joined: Wed Jun 08, 2011 6:00 pm
Location: Bellmore, NY
Contact:

Drain plugs

Post by Deadguy »

Does anyone know where I can obtain a set for my vehicle?
1952 M38A1
Marine core reinforced rear bumper, military transistorized turn signal upgrade, arctic heater, 11" drum brakes, 200L PTO winch, Huffy overdrive, deep water fording kit, RT 68 vehicle mounted radio, Trac Locs front and rear.
www.danhenk.com
User avatar
Oldsalt
Active Member
Active Member
Posts: 179
Joined: Wed Jan 27, 2010 6:00 pm
Location: Texas

Post by Oldsalt »

If you are talking about the floor drains, Jungle Jims and Kaiser Willys both list them.
User avatar
Deadguy
Jeep Enthusiast
Jeep Enthusiast
Posts: 776
Joined: Wed Jun 08, 2011 6:00 pm
Location: Bellmore, NY
Contact:

Post by Deadguy »

It looks like both have a metal cover with wingnuts. Is this correct? Do I need one or two, and how is it even installed?
1952 M38A1
Marine core reinforced rear bumper, military transistorized turn signal upgrade, arctic heater, 11" drum brakes, 200L PTO winch, Huffy overdrive, deep water fording kit, RT 68 vehicle mounted radio, Trac Locs front and rear.
www.danhenk.com
User avatar
Oldsalt
Active Member
Active Member
Posts: 179
Joined: Wed Jan 27, 2010 6:00 pm
Location: Texas

Post by Oldsalt »

The drain on each side is 2 holes. The drain cover plate mounts with a screw between the holes. You turn the plate to cover the holes or you turn it 90 degrees to expose the holes. One plate for each side of the jeep.
User avatar
wesk
Site Administrator
Site Administrator
Posts: 16468
Joined: Sun Apr 03, 2005 6:00 pm
Location: Wisconsin
Contact:

Post by wesk »

John at Midwest Military sells the drain covers and the rubber gaskets.
http://www.midwestmilitary.net/m38a1p10.html

Image
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
User avatar
Deadguy
Jeep Enthusiast
Jeep Enthusiast
Posts: 776
Joined: Wed Jun 08, 2011 6:00 pm
Location: Bellmore, NY
Contact:

Post by Deadguy »

Just ordered them from John. I was going to order from Jungle Jim, but I noticed they were twice the price, and they don't have the rivets or seals, just the metal covers.
1952 M38A1
Marine core reinforced rear bumper, military transistorized turn signal upgrade, arctic heater, 11" drum brakes, 200L PTO winch, Huffy overdrive, deep water fording kit, RT 68 vehicle mounted radio, Trac Locs front and rear.
www.danhenk.com
User avatar
circleburner12
Jeep Enthusiast
Jeep Enthusiast
Posts: 385
Joined: Sun May 15, 2011 6:00 pm
Location: arkansas

Post by circleburner12 »

been looking at them myself, but what's the rivets for?
User avatar
Bretto
Jeep Legend
Jeep Legend
Posts: 1390
Joined: Tue Nov 23, 2010 6:00 pm
Location: Orem, UT

Post by Bretto »

They hold the rubber to the covers.
Post Reply