M38A1 question. It's for a CDN 1953 the rear seat bottom seat pad. I have the original springs etc but it was re covered and done half ways right...can anyone elaborate on how the cover should be attached to the seat frame?I have the screw holes in the front and rear of the back seat frame but they had pop rivits in them and the seat pad/springs was loose and sat on the bottom. There are holes in the bottom for drainage I imagin.
So does the cover get screwed in from the front to the front of the seat fram and does it also get screwed in along the rear and the sides tucked under and hog ringed in place?
Any pictures would be appeciated...sincerely head case! thanks!