I looking a best place for buy a new carburetor (rebuilt)
Peter Debella, Midwest military.....
Thanks!
Carburetor M38
- elias929
- Contributor

- Posts: 56
- Joined: Wed Jul 17, 2013 6:00 pm
- Location: terrebonne,Canada
- wesk
- Site Administrator

- Posts: 16467
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:
John at Midwest Military http://www.midwestmil.com/
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
- elias929
- Contributor

- Posts: 56
- Joined: Wed Jul 17, 2013 6:00 pm
- Location: terrebonne,Canada
- M38CDNBill
- Contributor

- Posts: 133
- Joined: Tue Feb 20, 2007 6:00 pm
- Location: Trois-Rivieres, Canada
- elias929
- Contributor

- Posts: 56
- Joined: Wed Jul 17, 2013 6:00 pm
- Location: terrebonne,Canada
- elias929
- Contributor

- Posts: 56
- Joined: Wed Jul 17, 2013 6:00 pm
- Location: terrebonne,Canada
I received my carburetor, I am very happy, very good service and superb quality. I'm on the installation and everything is ok. I still have my primer pump. Is that it is preferable to join the system!
If so, I see that it is connected to the hose after a gas valve. But I do not see exactly where it is connected, gas valve at primer pump, primer pump to air intake vacuum!!
What is its function, distribute the gasoline at the carburetor, pull the vacuum for distribute the gasoline at the carburetor!!
I look at the book of Miller, I see the adapters, I see the diagram but I can not seem to identify exactly the hoses position...
If so, I see that it is connected to the hose after a gas valve. But I do not see exactly where it is connected, gas valve at primer pump, primer pump to air intake vacuum!!
What is its function, distribute the gasoline at the carburetor, pull the vacuum for distribute the gasoline at the carburetor!!
I look at the book of Miller, I see the adapters, I see the diagram but I can not seem to identify exactly the hoses position...
Michel.
1952 M38
1953 M100
1962 UNIMOG 404.
1945 Dodge APT 3/4
1975 M151A2
1952 M38
1953 M100
1962 UNIMOG 404.
1945 Dodge APT 3/4
1975 M151A2
- wesk
- Site Administrator

- Posts: 16467
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:
The dash mounted primer pump withdraws fuel from a "T" inserted in the tank fuel supply line adjacent to the shut-off valve. It fills itself with fuel as you pull it out and then when you press it in it forces that fuel through the two intake manifold mounted injectors.








Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
- elias929
- Contributor

- Posts: 56
- Joined: Wed Jul 17, 2013 6:00 pm
- Location: terrebonne,Canada
- elias929
- Contributor

- Posts: 56
- Joined: Wed Jul 17, 2013 6:00 pm
- Location: terrebonne,Canada
I am very happy, my M38 purrs perfectly. The carburetor was adjusted perfectly. I have installed and connected the hoses and start the jeep and everything was perfect. I hesitated for the new carburetor gasket, because he don `t have the small metal V but I haven` t notice any difference in the behavior of the engine. Now it runs like a new jeep.
John Midwest Military (http://www.midwestmilitary.net/). Made of very fine work.
Thanks!!!
John Midwest Military (http://www.midwestmilitary.net/). Made of very fine work.
Thanks!!!
Michel.
1952 M38
1953 M100
1962 UNIMOG 404.
1945 Dodge APT 3/4
1975 M151A2
1952 M38
1953 M100
1962 UNIMOG 404.
1945 Dodge APT 3/4
1975 M151A2