I have a M38 with L-motor.
Pressure, idle and power ok.
But there is oil consumption and oil
in exhaust gases.
No oil leak.
is it worn valve guides?
Intake or exhust guides?
or whatever....
please....
Thomas
Sweden
high oil consumption
- Nuffe
- Member
- Posts: 9
- Joined: Mon May 28, 2012 6:00 pm
- Location: Falun, Sweden
- wesk
- Site Administrator

- Posts: 16467
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:
First do a compression check. If compressions are low squirt an ounce or 2 of engine oil in each cylinder and do the compression test again. A noticeable increase in compressions indicates worn rings.
Checking guides is a visual inspection that requires the removal of the manifolds so you can see the tapered side of the valves and look for sticky oil residue.
Checking guides is a visual inspection that requires the removal of the manifolds so you can see the tapered side of the valves and look for sticky oil residue.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php