help with M170 wiring harness

Discussion topics on Willys Overland M series vehicles
Post Reply
User avatar
BCA
Contributor
Contributor
Posts: 134
Joined: Fri Jul 01, 2011 6:00 pm
Location: Milton, Ontario

help with M170 wiring harness

Post by BCA »

I just removed a decent harness that had been cobbled into an M38. I had assumed it was originally for an M38A1 but it had different #40 wires and someone had snipped off a loomed wire from the dash area and taped it over. It turns out this was actually an NOS M170 main lighting harness and that the wire cut wire had been #39A going to the reel trouble light.
I want to resurrect it but can someone tell me how long this #39A wire was: did it go all the way to the trouble light? How long was it? Was it loom-covered all the way? ..... Brian
Top
User avatar
buzzk
Active Member
Active Member
Posts: 197
Joined: Mon Dec 02, 2013 6:00 pm
Location: Saint Augustine , Florida

harness

Post by buzzk »

Joe from Vintage Wirring of Maine might know he makes them buzz
Top
Post Reply

Return to “Technical Knowledge Base”