Parting out an m38

Bill_F · Posted: Tue Jun 10, 2008 4:03 am Post subject:

I still have the starter was kind of hoping to sell all the 24 volt parts together. But for the right offer on the individual parts I will seperate at this point.

52M38 · Posted: Tue Jun 10, 2008 8:01 am Post subject:

How much were you thinking for the whole lot?

Bill_F · Posted: Tue Jun 10, 2008 8:25 am Post subject:

Here is what would be included

Generator
Regulator
Gen to Reg Cable
All engine sending units
All guages, and guage panel as well as some extra gauges and gauge panel that I have
Distriburator
All the wire connectors that are removed from the jeep and still in useable shape.

Everything except for a wiring harness , fuel tank sending unit, and lights that you need to bring your m38/m38a1 back to 24 volt.

After priceing parts out and seeing what It would cost me if I need all these parts I was thinking $500 but I am open to offers.

Bill_F · Posted: Tue Jun 10, 2008 10:34 am Post subject:

I also forgot to mention that that starter is included with that package

Bill_F · Posted: Thu Jun 12, 2008 7:00 am Post subject:

Major parts that are still availalbe

1) 24 volt parts
2) wheels
3) Maybe the engine

Bill_F · Posted: Thu Jun 12, 2008 7:00 am Post subject:

Frame, grill, front axle all sold pending funds. Not much left now. Still have 5 correct wheels. and all the 24 volt parts. Maybe even the engine. i hopefully will now about mine next week

Bill_F · Posted: Thu Jun 12, 2008 6:12 pm Post subject:

windshield frame back up for sale

Bill_F · Posted: Wed Jun 18, 2008 9:55 am Post subject:

The jeep should all be apart this weekend hopefully.

This is the list of what is left

1) Fairly Solid windshield frame, needs just minor repair done-- $150 obo
2) All the 24 volt parts, this includes starter, geneartor, regulator, gen to reg cable, distriburator, all sending units off the engine, all gauges with panel, and all the connectors for the wiring harness that are still good-- $500 obo I want to sell all 24 volt stuff together, I have a couple of extra gauges that will be included.
3) 5 Correct m38 wheels, not the ones in the picture, I have another set that have the tires off them and ready to go. One of them has a little damage around one lug, good for a spare, still safe to use-- $250 obo.
4) Front springs, rear might be sold-- make an offer.
5) fuel tank grab handle-- make an offer
6) Fuel shut off valve, and all fitting--$50 shipped in the 48
7) Inake and exhaust manifold good shape, heat riser even functions-- $150 obo
8.) Engine might be for sale, it is MC marked. I hope to know later this week if my RMC engine that I am using is rebuildable again. This engine turns over well. Sell for $600 or $1000 if you want all the 24 volt parts as well, $1100 if you want it with the manifold and 24 volt parts, $700 with manifold and no 24 volt parts. Well have the water pump on it. I think it will run but never tried to start it. Oil in it is clean and has no water. Engine will be from water pump to bell housing including flywheel and clutch.

I am sure there will be some other small parts that become available once things get taken apart. All items unless noted do not include shipping. I will follow up with the engine as soon as I get the one I am keeping back together again.

If you emailed me about a part and I did not get back to you let me know. I know a few people are still waiting on shipping prices. Shoud have those soon, just been raining all week and the jeep is outside.

Bill_F · Posted: Tue Jun 24, 2008 9:44 am Post subject:

wheels, 24 volt parts, engine lift ring, crossover tube, front shackles all sold pending funds.

Poochie · Posted: Wed Jul 02, 2008 4:31 am Post subject:

Looking for front springs for an M 38

Bill_F · Posted: Wed Jul 02, 2008 7:18 am Post subject:

They should be off the frame this weekend I will take pics to see if they are something you want.

layne · Posted: Tue Jul 15, 2008 7:14 pm Post subject:

Bill,
Have the rear springs sold Confused

? You had a maybe by them in an earlier post.
If not, I am interested in them Laughing

.

Thanks,
Layne
_________________
Layne Walters
M-38
M-100

Bill_F · Posted: Wed Jul 16, 2008 4:52 am Post subject:

They are still sitting at my brothers house. I need to get some pics of them, just have not had the time.

layne · Posted: Sat Jul 26, 2008 9:08 pm Post subject:

Bill,
Have you had a chance to check on the rear springs?

Thanks,
Layne
_________________
Layne Walters
M-38
M-100

Bill_F · Posted: Sun Jul 27, 2008 7:11 am Post subject:

I will try to get pics of those today.


Create an account	Home · · Forums · · Articles · · Downloads · · Photo Gallery


PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.