Steve,
Are you speaking of Canadian Forces supplied tool kits? The US M38's didn't leave Willys with a tool kit. They were issued by the owning service's supply arm from standard issue equipment items supplied by whomever their vendors were at the time of issue. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Joined: Jun 14, 2005 Posts: 110 Location: Calgary Alberta
Posted: Sat Feb 18, 2006 10:55 pm Post subject:
Hi Wes
I guess I just figured if the jeep came with a spare wheel then it would come with the jack and tire iron. I found a tire iron the other day that is almost identicle to the WO one for the MB and also the ford one for the GPW.
It is marked A!-W-3837-25 I was hoping it was an M38 one. I have never quieried the M38CDN tool kits, I just assumed they were all the same.
The only tool listed in the ORD 7 SNL G740 1953 for the organizational user is the front wheel bearing socket. The list below is from the same book.
Items shipped from Willys with the M38:
Wheel, Tire and tube assy. Consisting of:
a. H014-0511830 511830 Tire, pneu, 6 PR, LT, CC Tread,
w/controlled Bead, 7.00-16
b. H014-0519252 519252 Tube, pneu tire, truck & bus,
6.50/7.00-16 (TR-15 valve)
c. G503-7387807 7387807 Wheel, w/rim (16x4.50E, safety type)
d. 41-B-22590 Bracket, drum, inflammable liquid (gasoline), S,
welded, comp w/strap.
Items provided by the military service unit when jeep was issued to user:
a. 41-B-15 Bag, tool, empty
b. Catalog, ORD 7 SNL G-740 Organizational Maintenance
Allowances
c.H014-0540044 540044 Chain, pneau tire, pass car (type P)
7.00-16 and 7.50-16 (authorized for issue to meet local
conditions)
d. FORM (envelope), WDAGO No. 478 MWO and major unit
assembly replacement record and organizational equipment
file.
e. 8-G-620 Gage, tire press, general service type, calibrated 10
to 60 Lbs in 1 Lb. units and 60 to 160 Lbs. in 5 Lb units.
f. 41-H-1251-10 Handle, Jack, collapsible type, lgh overall 36 ¼”.
g. 41-J-74-507 Jack, automobile, screw type, cap 1 ½ ton,
contracted height 7 ¼”, extended height 16”
h. Manual, technical 9-804
i. Order, lube, 9-804.
j. 41-P-1652 Pliers, combination, slip joint, w/cutter, nominal size
8”.
k. 41-S-1076 Screw Driver, comm., hv-duty, integral handle, lgh
of blade 6” width of blade 3/8”, overall lgh 11 ¼”.
l. 41-W-486Wrench, adjustable sgle open end, jaw opening
15/16”, lgh 8”.
m. 41-W-1962-100 Wrench, plug, stgt bar, sq, size of plug ½”,
lgh 2 ½”.
n. 41-W-3837-25 Wrench, wheel stud nut, sgle head, offset
socket, hex size of opng ¾” , lgh 9 ¼”.
Tool Items issued to Organizational maintenance:
a. 41-T-3568-442 Tool Kit Organizational Maint. (2nd Echelon)
special set A.
(1) 41-W-3825-200 Wrench, wheel brg nut, sgle end, tubr,
hex, size of opening 2 1/8”, lgh 3.56”.
b. 41-T-3569-442 Tool kit, organizational maintenance (2nd
echelon), special, Set B
(1) 41-A-18-251 Adapter, puller, strg wheel.
(2) 41-C-2554-400 Compressor, Shock absorber rubber
grommet.
(3) 41-P-2951-850 Puller, steering bellcrank shaft
(4) 41-R-2374-750 Remover and Replacer, brg cup (spindle
pin) thd ¾”- 16NF-2 female (used w/screw 41-S-1047-300)
(5) 41-R-2374-845 Remover and Replacer, brg cup (wheel) Thd
1 ½”- 12NF-2 Female (used w/Screw 41-S-1047-300).
(6) 41-S-1047-300 Screw, remover and replacer (brg cup), thd
¾”-16NF-2, lgh 6”
(7) 41-S-1047-330 Screw, remover and replacer (brg sleeve),
thd 1 ¼”- 12NF-2, lgh 9”.
( 41-w-3825-200 Wrench, wheel brg nut, sgle end, tubr, hex,
size of opening 2 1/8”, lgh 3.56”. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Sorry about the omission. Item "N" in my list above is that wrench. I just dropped the part number by accident.
I don't know what tool kit supply system the Canadian forces used with the M38.
The ORD 7 makes it very clear that Willys did not ship M38's or M38A1's with tool kits. The using service installed the tool kits when the jeep was issued to a unit for use. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
41-w-3825-200 Wrench, wheel brg nut, sgle end, tubr, hex,
