View previous topic :: View next topic |
Author |
Message |
joeyfast13 Member
Joined: Oct 04, 2010 Posts: 32 Location: Van Buren, AR
|
Posted: Mon Feb 27, 2012 10:56 am Post subject: Small Battery Cables |
|
|
I have a m38a1 that was partially converted to 12v and i finished it.. Tore down the motor to put gaskets on it and new clutch..
I have double checked the timing gears..
It seems to turn over slow and im thinking that its not starting because of the small battery cables.
Am i right?
If the starter is pulling all the power from the small cables wouldnt that kill my coil power? |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16258 Location: Wisconsin
|
|
Back to top |
|
|
Oldsalt Member
Joined: Jan 28, 2010 Posts: 179 Location: Texas
|
Posted: Mon Feb 27, 2012 1:10 pm Post subject: |
|
|
Small battery cables are typically not an issue on 12v systems, even if you are using the original cables from the 24v system. There are lots of other things to look at first. Does your battery test good? Are your battery cable connections clean and tight? Is your timing set correctly? Spark plug wires in the correct order? Any chance your starter is binding against the flywheel?
is your timing set correctly? Are your spark plug wires in the correct order? Assuming you did change the 24v starter for a 12v starter, is it good? Is it perhaps binding against the flywheel? |
|
Back to top |
|
|
joeyfast13 Member
Joined: Oct 04, 2010 Posts: 32 Location: Van Buren, AR
|
Posted: Mon Feb 27, 2012 7:10 pm Post subject: |
|
|
Jeep ran great before i tore it apart and starter worked great. Use to start up real easy. Ive had a full a full charged battery in it and have hooked jumper cables negative on negative and positive on the starter hot post didnt changed how it turned over and jumper cables are pretty small and the felt warm. The only thing i changed as far as electrical was the jumper cables i had the big ones on it before when it ran.. But i put smaller ones on as was wondering what you guys think? When it warms up im gonna get outside and start tinkering with it. |
|
Back to top |
|
|
Oldsalt Member
Joined: Jan 28, 2010 Posts: 179 Location: Texas
|
Posted: Wed Feb 29, 2012 1:30 pm Post subject: |
|
|
When you say jumper cables, do you mean the battery cables? If you are feeling heat then you definitely have a resistance. If that heat is in a specific spot, like the battery terminal then you might have a problem with a dirty connection. Cables that have those clamp on terminals are a frequent cause of problems because corrosion can form in those clamps. If you still have the bigger cables, putting them back on is an easy test to see if it helps. |
|
Back to top |
|
|
artificer Member
Joined: Feb 16, 2007 Posts: 206 Location: Gold Coast Australia
|
Posted: Wed Feb 29, 2012 2:26 pm Post subject: |
|
|
If the engine has been out you need to be checking all the ground cables are clean & have been re-installed. The best way to quickly establish whether it is a starter related problem is to jump directly from the battery negative terminal to the starter body or attaching bolts. Then try & start.
Off course you can also use your automotive multimeter <$20 to test all of these things. _________________ John GIBBINS
ASE Master Medium/Heavy Truck & Auto Technician 2002 USA
Licensed Motor Mechanic NSW # MVIC 49593 Current
YOU CAN'T TROUBLESHOOT WHAT YOU DON'T UNDERSTAND |
|
Back to top |
|
|
|