View previous topic :: View next topic |
Author |
Message |
eagle64 Member
Joined: Dec 30, 2014 Posts: 75
|
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16256 Location: Wisconsin
|
Posted: Sun Mar 22, 2015 9:44 pm Post subject: |
|
|
You can cap that port on the wiper "T" that would have fed your wipers with an 1/8" P plug. With no wipers you should keep the line from the intake to the vac side of the pump and from the vac side of the pump to the wiper "T". Then the line from the wiper "T" to the distributor should remain installed.
But not that center threaded empty hole halfway up the side of the fuel pump. That should be plumbed to your bell housing if the basic integral fording vent system is installed or install a vent cap on it also.
_________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php |
|
Back to top |
|
|
eagle64 Member
Joined: Dec 30, 2014 Posts: 75
|
Posted: Mon Mar 23, 2015 6:40 am Post subject: I'm using fire fox for a browers |
|
|
I'm using Firefox for my browser. how do I get the correct address to link the photo.
I'm trying
thanks for the photo that sure helps to see where things go.. I will be adding wipers at a later date, I just didn't know if those holes should be plugged until then |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16256 Location: Wisconsin
|
Posted: Mon Mar 23, 2015 8:19 am Post subject: |
|
|
The Vacuum section of the pump must be able to breath. If you have the stock 24 volt distributor it needs the vacuum line connected even if you are not running vacuum wipers. That suct line to the distributor removes explosive ionized gasses from the distributor body and assists in cooling the coil.
Right click on the photo you want to use. In the drop down menu that appears select and click on "Copy image url". Now go to your post and paste that url between the two "[img][/img]". _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php |
|
Back to top |
|
|
DownRange762 Member
Joined: Apr 16, 2015 Posts: 31
|
Posted: Tue Apr 21, 2015 2:50 pm Post subject: |
|
|
I have a similar question on my M38A1, but I'm not following how to post a picture of what I don't have in terms of hard vac lines on my vehicle. I have the two lower ports plugged and no hard lines. It is my goal to put the vac wipers back in service and of course I do want to vent the distributor as you noted. The color image you have in this thread I'm guessing is on an M38 as the fuel pump and other items look substantially different from my A1.
As I bought the vehicle it has the crankcase vent fitting and one vertical hard line running on the left side of the block, no horizontal lines, no Tee fittings as I'm seeing in the manuals.
Best suggestions at this point?
Thanks,
Wade
[/img]http://willysmjeeps.com/v2/modules/gallery/albums/album99/IMG_4236.thumb.jpg[img][/img] _________________ Wade
Baton Rouge, LA
M38A1
M35A3
M37B1
Last edited by DownRange762 on Thu Apr 23, 2015 3:24 pm; edited 1 time in total |
|
Back to top |
|
|
4x4M38 Member
Joined: May 30, 2014 Posts: 3447 Location: Texas Hill Country
|
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16256 Location: Wisconsin
|
|
Back to top |
|
|
DownRange762 Member
Joined: Apr 16, 2015 Posts: 31
|
Posted: Thu Apr 23, 2015 3:26 pm Post subject: wiper motor |
|
|
I tried editing my post in this thread above now that I have a couple of pictures loaded in my photo album. Clearly I wasn't successful. Can you tell me where I went wrong trying to post to this thread from my album on this site?
thanks,
Wade _________________ Wade
Baton Rouge, LA
M38A1
M35A3
M37B1 |
|
Back to top |
|
|
4x4M38 Member
Joined: May 30, 2014 Posts: 3447 Location: Texas Hill Country
|
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16256 Location: Wisconsin
|
|
Back to top |
|
|
DownRange762 Member
Joined: Apr 16, 2015 Posts: 31
|
Posted: Fri Apr 24, 2015 9:44 am Post subject: Wipe vacuum |
|
|
Sorry I'm testing the patience of the veteran forum members trying to work out how to post a picture relevant to my vacuum line question. I had hoped by leaving the command string in the post above, now reproduced below, that someone with more experience could look at it and have that "ah hah" moment that clearly is eluding me as to what I'm doing wrong.
I did attempt to follow the tutorial you conveniently provided and that was helpful with regard to uploading to the album. I would have thought that importing a picture from that album into a post would be fairly simple. As shown below I did use the "Img" button at the start of the URL string and again at the end. I'm guessing file size shouldn't be an issue since this is coming from the uploaded album.
I get that new members asking basic questions that established members feel have already been perfectly answered a thousand times before is annoying. If anyone cares to provide some further guidance I'd appreciate the help.
[/img]http://willysmjeeps.com/v2/modules/gallery/albums/album99/IMG_4236.thumb.jpg[img][/img]
[img]This symbol must precede the link and this symbol follows the link[/img] _________________ Wade
Baton Rouge, LA
M38A1
M35A3
M37B1 |
|
Back to top |
|
|
DownRange762 Member
Joined: Apr 16, 2015 Posts: 31
|
Posted: Fri Apr 24, 2015 9:48 am Post subject: Wiper vacuum lines |
|
|
I found my error in posting a picture and this shows the left side of my engine. What I was really seeking through all of this was other images of how the vacuum lines were originally routed since clearly there are none here. _________________ Wade
Baton Rouge, LA
M38A1
M35A3
M37B1
Last edited by DownRange762 on Fri Apr 24, 2015 10:01 am; edited 2 times in total |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16256 Location: Wisconsin
|
|
Back to top |
|
|
DownRange762 Member
Joined: Apr 16, 2015 Posts: 31
|
Posted: Fri Apr 24, 2015 10:07 am Post subject: |
|
|
The words, "...clearly none here." was in reference to MY engine block lacking hard vacuum lines in this location...as in "clearly there are none" installed on MY engine. It wasn't, "clearly there are no photos of value on this forum"
It was not meant, nor do I think it reads, as a commentary on the range of quality photos on this forum. I'm really not trying to be cute or sarcastic. I really wanted help. I really find this forum to be filled with useful information. _________________ Wade
Baton Rouge, LA
M38A1
M35A3
M37B1 |
|
Back to top |
|
|
RICKG Member
Joined: Aug 31, 2010 Posts: 1741 Location: SO IDAHO
|
Posted: Fri Apr 24, 2015 10:12 am Post subject: |
|
|
Yes..clearly there are no vac lines on your F134.
Wade,
I see you were able to post a thumbnail foto. That's a start. If you dbl click your foto before you copy the foto and do the img/img thing you'll post the larger version. Keep trying. _________________ keep 'em rollin'
RICKG MC 51986 DOD 01-52, '50 CJ3a |
|
Back to top |
|
|
|