Posted: Tue Jan 17, 2017 5:23 pm Post subject: Steering Sector shaft for M38
A few months ago Oilleaker 1, John, and RickG, Rick, posted about broken Omni Ada.
When rebuilding my Ross steering box I was concerned because I needed a sector shaft but was hesitant to purchase the aftermarket Crown or Omni Ada ones. I was not able to find anything else on line.
Recently I called Brent Mullins and found that he has NOS sector shafts for the M38. I picked one up today and the cost was comparable with what I saw for the Crown and Omni Ada ones.
I feel much better putting my box back together with these sector shafts and wanted to let anyone else who is in need of one that NOS ones are still available. I not saying that on one else has the NOS ones, I just happen to have found them at Mullins. _________________ R G Mutchler
Joined: May 14, 2009 Posts: 970 Location: South Dakota
Posted: Wed Jan 18, 2017 5:32 pm Post subject:
Good for you! I'm glad you saw the warning. Early M38's were 7/8 and later were 15/16. It's the 7/8 ones to watch. Very bad carma when one of those crappy sectors breaks. Makes you feel threatened. We recently also saw a post here of a Omix Ada fuel line cracking. One must not trust off shore made stuff. They have poor quality control. When anyone finds out the particular part they installed is a threat, please post your findings. It's a great help to all our Jeep friends. I appreciate it also. John
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum