| View previous topic :: View next topic |
| Author |
Message |
TOM-R
Member
Joined: Sep 08, 2006
Posts: 54
|
 Posted: Sat Jan 20, 2007 1:38 pm Post subject: wiring for blackouts |
 |
|
guys I am finishing up the remainder of my wiring got 2 questions,
first can someone post or email me a pic of how to route the wire for the fender mounted blackout lite
second where can i get 2 plugs to fit the b/o lites in the grille? i am using mutt b/o lites with the water proof plugs thanks  |
|
| Back to top |
|
 |
OKCM38CDN
Guest
|
| Posted: Sat Jan 20, 2007 5:47 pm Post subject: |
|
|
The rubber Packard connectors can be gotten from Saturn Surplus...
As for the routing they drop from the Headlight connections to the BO lights if I remember correctly...
Hope this helps... |
|
| Back to top |
|
|
TOM-R
Member
Joined: Sep 08, 2006
Posts: 54
|
| Posted: Sat Jan 20, 2007 7:48 pm Post subject: |
|
|
 the grille lites i can route it is the fender 1 i do not know how to route it into the engine compartment, do i put a hole in the fender and run it along the hat channel and then punch a hole in the wheel well to get it into the engine compartment where i have the junction block?  |
|
| Back to top |
|
|
Kendall
Member
Joined: Feb 25, 2006
Posts: 344
Location: Wichita, KS
|
| Posted: Sun Jan 21, 2007 5:47 pm Post subject: B/O wiring |
|
|
| The wires go along the top of the fender (there should be a hole for a small hold-down clamp on the fender) and then drops down along the engine side of the fender in front of the horn and joins the rest of the wiring harness from there. Hope this helps, Kendall |
|
| Back to top |
|
|
TOM-R
Member
Joined: Sep 08, 2006
Posts: 54
|
| Posted: Sun Jan 21, 2007 6:55 pm Post subject: |
|
|
| thanks, i got a hole in the fender that accesses the inside of the hat channel think i will run the wire in there just need to figure on how to fish it out |
|
| Back to top |
|
|
|
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
