Posted: Sat Aug 19, 2017 5:21 pm Post subject: M38 idle issue
My M38 recently developed an idle issue. It will idle fine for a couple of minutes, and then begin slowly running rougher until it stalls. I've found that if I disconnect the crossover vent tube to the carb, the problem goes away. The vent tube is clear, as are both of the ends where it connects. I have anther vent tube that I tried in its place, with the same results. This has me stumped as I believe the venting is to prevent a vacuum from developing in the bowl. If the tube and the connections are clear, why does this occur?
Joined: Feb 17, 2012 Posts: 530 Location: Del City, OK
Posted: Sat Aug 19, 2017 7:14 pm Post subject:
Check the tube inside the crossover tube, there is about an inch or more inside the crossover, it connects then bends up an into the crossover... possibly got a bug in there. Use a small piece of flexible wire to snake in and see if it is clear... _________________ Hal, KB1ZQ
TSGT, USAF (Ret)
1952 M-38 CDN CAR 52-31313
1952 M-100 Strick #104
1951 Willys Wagon (For Sale)
1954 Willys M38A1 201001205
Tornado Alley
Del City, OK
Joined: Feb 17, 2012 Posts: 530 Location: Del City, OK
Posted: Sat Aug 19, 2017 7:45 pm Post subject:
Just thinking of this, try taking the gas cap off. You might be suffering vapor lock... _________________ Hal, KB1ZQ
TSGT, USAF (Ret)
1952 M-38 CDN CAR 52-31313
1952 M-100 Strick #104
1951 Willys Wagon (For Sale)
1954 Willys M38A1 201001205
Tornado Alley
Del City, OK
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum