View previous topic :: View next topic |
Author |
Message |
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16267 Location: Wisconsin
|
Posted: Wed Nov 01, 2017 7:16 am Post subject: |
|
|
Most of those 40's & 50's depots would completely disassemble a jeep at the start of the depot overhaul. they went thru a production line. The rebuilds were all body off rebuilds and the frames were stamped with a serial not so the original jeep stayed together thru the production line but so they would end up with a serial for each jeep at the end of the production line and they would put that serial #"s serial plates and hood number back on it. This is why surplus jeeps are often found with parts that should have been on another serial group on them. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php |
|
Back to top |
|
|
4x4M38 Member
Joined: May 30, 2014 Posts: 3447 Location: Texas Hill Country
|
|
Back to top |
|
|
Watchdog Member
Joined: Mar 17, 2015 Posts: 10 Location: Perth, Western Australia
|
Posted: Wed Nov 01, 2017 10:05 pm Post subject: |
|
|
I must admit I didn't appreciate the importance of that side of the dash. I will take some better close ups to show that area. _________________ Eric M38 |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16267 Location: Wisconsin
|
|
Back to top |
|
|
Watchdog Member
Joined: Mar 17, 2015 Posts: 10 Location: Perth, Western Australia
|
Posted: Thu Nov 09, 2017 12:12 am Post subject: |
|
|
Unfortunately life has been getting in the way. Survey is being completed a little slower than hoped but is getting there. Attached are some photo's to provide a better 'whole' and some of the engine.
_________________ Eric M38 |
|
Back to top |
|
|
4x4M38 Member
Joined: May 30, 2014 Posts: 3447 Location: Texas Hill Country
|
|
Back to top |
|
|
4x4M38 Member
Joined: May 30, 2014 Posts: 3447 Location: Texas Hill Country
|
Posted: Thu Nov 09, 2017 8:21 am Post subject: |
|
|
Well that is a dash that had the plates individually
attached from the factory. The holes are very evident
in one of your latest photos.
The radiator brace rod looks like a replacement. Certainly
not factory with that u shape in it, but probably
very practical!
Still would like to see the firewall behind the air cleaner.
I think you can stick your camera between the left side bracket
and the air cleaner near the bottom to get a good look at the firewall.
Still, a lot to work with there! _________________ Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php |
|
Back to top |
|
|
Watchdog Member
Joined: Mar 17, 2015 Posts: 10 Location: Perth, Western Australia
|
Posted: Tue Nov 14, 2017 5:33 pm Post subject: |
|
|
Hi Brian,
Thanks for the tip on bracketing the photo's must have missed that bit. It has been a busy week however I will get some photo's together of the wall behind the air cleaner. _________________ Eric M38 |
|
Back to top |
|
|
|