when we lifted the engine the top part came away with the engine and the lower part with the rad braces stayed on the frame... Ideas
Most likely you lift the engine without removing the two bolts that bolt the mount's bottom plates to the frame. The mounts were probably old and tired and separated easily from the rubber. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Joined: Apr 26, 2017 Posts: 50 Location: Butler pa
Posted: Sat Sep 25, 2021 11:07 am Post subject:
New mounts came in but didn't have the groove in the bottom plate like the old ones. I would think they are usable. Looking of Willys site didn't see any with the grooved plate as the bottom plate fitting the engine side. Also got ith my order transmission moutns but don't see them on the jeep I have.
Edit: I see that the pictures posts in about post from Wes. The engine mounts in your picture. I can rebuy new old stock with the groove at the bottom, or use the ones I got that are flat on the bottom.
Joined: Oct 02, 2014 Posts: 1928 Location: South Carolina, Dorchester County
Posted: Sat Sep 25, 2021 4:44 pm Post subject:
Hello mydadsjeep,
You didn't say, but I'm guessing you have a M38A1? (this post is about M38 motor mounts)
Not sure I understand what you're asking. What "willys site" are you talking about? If you have a new question it's usually better to start a new topic so you get better responses to specific questions.
While it might not be "correct" for your jeep, I believe either mount will work if you're using the lower radiator support rods. If you're not using the rods or aren't building to the military detail, they'll still work for you, as would a CJ mount. _________________ Ron D.
1951 M38 Unknown Serial Number
1951 M100 Dunbar Kapple 01169903 dod 5-51
“The only good sports car that America ever made was the Jeep."
--- Enzo Ferrari
All times are GMT - 6 Hours Goto page Previous1, 2, 3
Page 3 of 3
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum