Posted: Tue Jul 03, 2018 9:00 am Post subject: Fuel Pump issue M38
Looks as if our fuel pump ain't pumping. I think the fuel pump is a "dual action" pump. I see a rebuild kit for a "single action" pump. Does anyone make a rebuild kit for a dual action pump? Can you buy a rebuilt pump from a vendor (I see where we can ship this one off to someone like Kaiser-Willys and they will rebuild it in 3-4 weeks-we'd rather not wait 3-4 weeks). Tks for any advice.
Mike
Mike, I have split these new technical questions from your old 51 M38 resto post so they will get more specific attention and to eliminate the confusion of mixed questions & answers in a single post. Try to always post your individual technical questions in individual posts. We have a board where you can keep a running post that reports the progress of your resto but the posting rules there explain that when individual technical issues arise they should be posted on this Technical Board.
You need to replace the 6 check valves in the top section.The diaphgrams seldom go bad.Just had the same problem with my M38.Try midwest military.
We shipped the old pump off to DeBella's. They will see if it is rebuildable and if so will sell us a rebuilt one, keeping this one to rebuild. The rebuild kit they had for it is not correct for our's. Tks.
Over the years the kits are getting harder to find but I have always rebuilt my own pumps. You order the kit using the manufacturer's part number for the pump. You take the last four numbers on the pump's flange and find the matching # in the part manual with the same last four. IE 4260 on the flange will be AC# 5594260. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Posted: Wed Jul 04, 2018 9:01 am Post subject: Re: Fuel Pump issue M38
redvettemike wrote:
Looks as if our fuel pump ain't pumping. I think the fuel pump is a "dual action" pump. I see a rebuild kit for a "single action" pump. Does anyone make a rebuild kit for a dual action pump? Can you buy a rebuilt pump from a vendor (I see where we can ship this one off to someone like Kaiser-Willys and they will rebuild it in 3-4 weeks-we'd rather not wait 3-4 weeks). Tks for any advice.
Mike
Mike, I have split these new technical questions from your old 51 M38 resto post so they will get more specific attention and to eliminate the confusion of mixed questions & answers in a single post. Try to always post your individual technical questions in individual posts. We have a board where you can keep a running post that reports the progress of your resto but the posting rules there explain that when individual technical issues arise they should be posted on this Technical Board.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum