Engine rebuild tag

Discussion topics on Willys Overland M series vehicles

Moderators: TomM, Moderator, wesk

Post Reply
User avatar
TonyMorreale
Member
Posts: 68
Joined: Fri Apr 15, 2005 6:00 pm
Location: Franklin, TN
Contact:

Engine rebuild tag

Post by TonyMorreale »

Finally got some time to work on my M38 today and discovered a brass engine rebuild tag located adjacent to the oil pressure sending unit. One corner has been pulled from the block and subsequently creased the middle of the tag. That, plus paint and gunk are making it hard to read and make out the stampings.

Does anyone have a clear picture or an illustration of what the tag should say so I know what fields I'm trying to read?

Also, the tag appears to be rivited to the block as I can find no slots for a screwdriver. Is this normal?

Engine number on water pump boss: MC97051
Number on dash plate and wheel well plate: 56957
Date of Delivery: 3/52

Thanks!
Tony Morreale
Franklin, TN
User avatar
Ryan_Miller
Site Administrator
Site Administrator
Posts: 1668
Joined: Sat Apr 02, 2005 6:00 pm
Location: Kansas

Post by Ryan_Miller »

Engine rebuild tags are usually riveted from the ones I have seen.

I should have a picture of one somewhere. Will check and post it when I find it.
Ryan Miller
MVPA # 22010
User avatar
GregS
Member
Posts: 174
Joined: Tue Apr 12, 2005 6:00 pm

Post by GregS »

Tony,
If you email me the picture of the rebuild tag I will post it for you.

Mine also had one, I don't have any photos of it yet. When I rebuilt the engine I cleaned it up and fastened it back in place. It was held in place by the same type of drive pins/rivets that hold the chains on the lifting rings in place.

Greg
User avatar
wesk
Site Administrator
Site Administrator
Posts: 16413
Joined: Sun Apr 03, 2005 6:00 pm
Location: Wisconsin
Contact:

Post by wesk »

They are called drive screws and can be found at most quality hardware stores.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
Post Reply